Adjusting The Placement Of The Cisco Unified Ip Phone - Cisco 7962G Administration Manual

Chapter 3 Setting Up the Cisco Unified IP Phone
To add support for one expansion module on Cisco Unified IP Phone 7962G, in the Module 1 field,
choose 7914 14-Button Line Expansion Module for the Cisco Unified IP Phone Expansion Module
7914, 7915 12-Button Line Expansion Module or 7915 24-Button Line Expansion Module for the
Cisco Unified IP Phone Expansion Module 7915, or 7916 12-Button Line Expansion Module or
7916 .24-Button Line Expansion Module for the Cisco Unified IP Phone Expansion Module 7916.
To add support for a second expansion module on Cisco Unified IP Phones 7961G and 7961G-GE, in
Step 7
the Module 2 field, choose 7914 14-Button Line Expansion Module.
To add support for a second expansion module on Cisco Unified IP Phone 7962G, in the Module 2 field,
choose 7914 14-Button Line Expansion Module for the Cisco Unified IP Phone Expansion Modules
7914, 7915 12-Button Line Expansion Module or 7915 24-Button Line Expansion Module for the
Cisco Unified IP Phone Expansion Module 7915, or 7916 12-Button Line Expansion Module or
7916 24-Button Line Expansion Module for the Cisco Unified IP Phone Expansion Module 7916.
Note
In the Firmware Load Information section, there are two fields that specify the firmware load for
Modules 1 and 2. You can leave these fields blank to use the default firmware load.
Click the Save icon.
Step 8
A message displays asking you to click the Apply Config for the changes to take effect. Click OK.
Click Apply Config.
Step 9
The Apply Configuration Information dialog appears.
Click OK.
Step 10
Note Refer users to their Cisco Unified CM User Options web pages, so they can configure speed-dial buttons
and program buttons to access phone services on the Cisco Unified IP Phone Expansion Module. See the
"How Users Subscribe to Services and Configure Phone Features" section on page A-3
Related Topic
•

Adjusting the Placement of the Cisco Unified IP Phone

The Cisco Unified IP Phone includes an adjustable footstand. When placing the phone on a desktop
surface, you can adjust the tilt height to several different angles in 7.5 degree increments from flat to 60
degrees. You can also mount these phones to the wall by using the footstand or by using the optional
locking wall mount kit.
OL-18913-01
If the phone uses the SCCP protocol, you can configure a maximum of 42 lines on your phone.
For example, if you configure two 24-line Cisco Unified IP Phone Expansion Modules, you will
have a total of 56 lines (48 lines from the modules in addition to the 8 lines on the phone).
However, only the first 42 lines will be available for use.
Configuring Softkey Templates, page 5-20
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 7.1
Adjusting the Placement of the Cisco Unified IP Phone
for more details.
3-9