Universal Robots UR10e PolyScope X User Manual page 9

1. Liability and Intended Use
1. Liability and Intended Use
1.1. Limitation of Liability
Description Any information provided in this manual must not be construed as a warranty, by UR, that
the industrial robot will not cause injury or damage, even if the industrial robot complies
with all safety instructions and information for use.
1.2. Intended Use
Description
Universal Robots robots are intended for industrial use, to handle tools/end effectors and
fixtures, or to process or transfer components or products.
All UR robots are equipped with safety functions, which are purposely designed to enable
collaborative applications, where the robot application operates together with a human.
The safety function settings must be set to the appropriate values as determined by the
robot application risk assessment.
The robot and Control Box are intended for inside use where, normally, only non-
conductive pollution occurs i.e. Pollution degree 2 environments.
Collaborative applications are only intended for non-hazardous applications, where the
complete application, including tool/end effector, work piece, obstacles and other
machines, is low risk according to the risk assessment of the specific application.
User Manual
NOTICE
Universal Robots takes no responsibility and assumes no liability for
unapproved uses of its robots or uses for which its robots are not
intended and Universal Robots will provide no support for unintended
uses.
READ MANUAL
Failure to use the robot in accordance with the intended use can result in
hazardous situations.
•
Read and follow the recommendations for intended use and the
specifications provided in the User Manual.
11 UR10e PolyScope X