Table E-3: Hot-Plug SCSI Hard Drive LED Combinations
Activity
Online
LED
LED
On
Off
On
Flashing
Flashing
Flashing
Off
Off
HP ProLiant ML370 Generation 3 Server Setup and Installation Guide
Fault
Status
LED
Off
Do not remove the drive. Removing a drive during this
process causes data loss.
The drive is being accessed and is not configured as part of
an array.
Off
Do not remove the drive. Removing a drive during this
process causes data loss.
The drive is rebuilding or undergoing capacity expansion.
Flashing
Do not remove the drive. Removing a drive during this
process causes data loss.
The drive is part of an array being selected by the Array
Configuration Utility.
-Or-
The Options ROMPaq is upgrading the drive.
Off
OK to replace the drive online if a predictive failure alert is
received and the drive is attached to an array controller.
The drive is not configured as part of an array.
-Or-
If this drive is part of an array, a powered-on controller is not
accessing the drive.
-Or-
The drive is configured as an online spare.
LED Indicators and Switches
continued
E-5