Rom Legacy Usb Support - HP 195294-001 - ProLiant - ML370R Setup And Installation Manual
Hp proliant ml370 generation 3 setup and installation guide
Hide thumbs
Also See for 195294-001 - ProLiant - ML370R:
- Reference manual (138 pages) ,
- Configuration manual (2 pages) ,
- Installation instructions manual (15 pages)
Table of Contents
Advertisement
Server Configuration and Utilities
ROM Legacy USB Support
When using operating systems that support USB, the server supports USB devices,
including, but not limited to:
•
CD-ROM drives
•
Diskette drives
•
Keyboard
•
Mouse
For other operating systems, the ROM provides USB support for the keyboard and
mouse, but not for CD-ROM or diskette drives.
ROM legacy USB support is available during POST, DOS, and while the operating
system is running. The ROM does not support hot-plug events for the USB keyboard
or USB mouse at any time. The maximum device support is two USB keyboards, two
USB mouse devices, and one layer of hubs.
NOTE: The SmartStart Microsoft Windows 95 environment does not support a USB mouse.
During the SmartStart process, you must use a legacy PS/2 mouse.
For a list of operating systems supported by the server, refer to
www.hp.com/products/servers/platforms
To determine whether an operating system supports a particular feature, refer to
ftp.compaq.com/pub/products/servers/OS%20Feature%20Matrix%20103000.pdf
7-12
HP ProLiant ML370 Generation 3 Server Setup and Installation Guide
Advertisement
Table of Contents
