Smartstart Diskette Builder - HP 195294-001 - ProLiant - ML370R Setup And Installation Manual

Server Configuration and Utilities

SmartStart Diskette Builder

The SmartStart Diskette Builder is a utility that uses data stored on the
SmartStart CD to create support diskettes. You can create support diskettes for
specific configuration needs or for software that cannot be used directly from the
SmartStart CD. Use the SmartStart Diskette Builder to create the following support
diskettes:
•
Array Configuration Utility
•
Operating system support
•
Diagnostic utilities
•
Server utilities
•
Erase utility
•
System and option ROMPaq
To run the Diskette Builder, you need the following:
•
A PC with one of the following operating systems:
— Microsoft Windows 95
— Microsoft Windows 98
— Microsoft Windows NT
— Microsoft Windows 2000
— Microsoft Windows XP
•
Several 1.44-MB diskettes
All existing data on the diskettes is overwritten. Insert the SmartStart CD in the
workstation drive. The CD automatically runs the Diskette Builder utility.
However, if the PC does not support the auto-run feature, use Windows Explorer and
enter the following command line:
[CD-ROM DRIVE]:\DSKBLDR\DSKBLDR.EXE
7-14 HP ProLiant ML370 Generation 3 Server Setup and Installation Guide