HP 195294-001 - ProLiant - ML370R Setup And Installation Manual page 32

Server Features
•
Insight Manager 7
Insight Manager 7 is installed from the Management CD. It is an easy-to-use,
intuitive software utility designed for collecting server information including
fault conditions, performance, security, remote management, and recovery
services.
•
Diagnostics Utility (DIAGS)
The Diagnostics Utility displays information about the server's hardware and
tests the system to ensure that it is operating properly. If you used SmartStart to
install the operating system, you can access the Diagnostics Utility from the
SmartStart CD.
•
Automatic Server Recovery-2 (ASR-2)
ASR-2 enables the server to boot either automatically from the operating system
or from HP utilities. If there is a critical system failure, ASR-2 automatically
restarts the server and can be configured to page a designated system
administrator.
•
Integrated Management Log (IML)
The IML provides a detailed log of key system events. This log also monitors the
server health log and is accessible from Insight Manager 7 and Integrated
Lights-Out (iLO).
•
Multi-Initiator Configuration Utility
The Multi-Initiator Configuration Utility enables administrators to configure the
Integrated Dual Channel Ultra3 SCSI controller for support of HP and Compaq
branded storage and clustering options.
For more information about these tools and utilities, refer to the following sources:
•
Chapter 7, "Server Configuration and Utilities"
•
ProLiant Essentials Foundation Pack
•
Documentation CD
1-14 HP ProLiant ML370 Generation 3 Server Setup and Installation Guide