Hot-Plug Power Supply LEDs
Determine the hot-plug power supply status by noting the color of the power supply
LED located adjacent to the AC inlet.
Figure E-5: Hot-plug power supply LEDs
Table E-5: Hot-Plug Power Supply LEDs
Item
Description
1
Secondary (redundant) power supply
2
Primary power supply
When the power supply LED is off, the following conditions may exist:
•
No AC power is available.
•
The power supply has failed.
•
The power supply is in standby mode.
•
The power supply has exceeded the current limit.
When the power supply LED is green, power is applied and the power supply is
functioning properly.
HP ProLiant ML370 Generation 3 Server Setup and Installation Guide
LED Indicators and Switches
E-9