Removing The Access Panel - HP 195294-001 - ProLiant - ML370R Setup And Installation Manual

Installing Hardware Options

Removing the Access Panel

WARNING: To reduce the risk of personal injury from hot surfaces, allow the
internal system components to cool before touching them.
CAUTION: Do not operate the server for any length of time without the access panel
installed. Operating the server without its access panel results in improper cooling
that can lead to thermal damage.
CAUTION: To avoid the risk of damage to the system or optional components,
remove all AC power cords before installing or removing non-hot-plug options. When
the Power On/Standby button is in the off position, auxiliary power is still present and
may damage the system.
CAUTION: Electrostatic discharge can damage electronic components. Be sure you
are properly grounded before beginning any installation procedure.
Place the tower server on a flat working surface or extend the rack server from the
rack before removing the access panel. The system configuration and options labels
located on the inside of the access panel provide information on installing hardware
options, locating system switches and LEDs, and upgrading system resources.
Be sure that the access panel is securely in place before powering up the server.
3-18 HP ProLiant ML370 Generation 3 Server Setup and Installation Guide