HP 195294-001 - ProLiant - ML370R Setup And Installation Manual page 131

Hp proliant ml370 generation 3 setup and installation guide
Hide thumbs Also See for 195294-001 - ProLiant - ML370R:
Table of Contents

Advertisement

Installing the Rack Server
2. Insert the rail tabs from the spring-loaded end of the assembly into the marked
holes on the interior of the vertical rails on the front of the rack (1).
IMPORTANT: The smooth side of the spring-load rail assembly must face the outside of
the rack.
3. Grasp the spring-load rail assembly and squeeze the two spring release tabs in
toward the rail to unlock the spring mechanism (2).
4. Grasp the far end of the spring-load assembly with your other hand and pull the
rail in toward you until the rack tabs on the fixed end of the assembly clear the
interior side of the rear vertical rack rail (3).
Figure 4-5: Inserting the spring-load rails into the front
of the rack
4-8
HP ProLiant ML370 Generation 3 Server Setup and Installation Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ml370 - proliant - g3Ml370 - proliant - g3

Table of Contents