HP 195294-001 - ProLiant - ML370R Setup And Installation Manual page 179

Server Configuration and Utilities
Automatic Server Recovery (ASR)
The Automatic Server Recovery menu option includes the following items:
•
ASR Status—allows you to enable or disable the Automatic Server Recovery
option. The default for this setting is enabled.
•
ASR Timeout—allows you to set the length of time that the system waits before
it reboots. The default is five minutes.
•
Thermal Shutdown—allows you to enable or disable the system's automatic
shutdown feature caused by a thermal caution event. This option is enabled by
default. HP does not recommend disabling this feature. The default for this
setting is enabled.
Server Passwords
The Server Passwords menu option enables you to set up passwords to limit access
to the system and its setup options. The following selections are available on this
menu:
•
Set Power-On Password—allows you to assign a power-on password. This
password prevents unauthorized users from powering on the system. The default
for this setting is disabled.
•
Set Admin Password—allows you to assign an administrator password. This
password prevents unauthorized users from modifying the setup options. The
default for this setting is disabled.
•
Network Server Mode—allows you to disable or enable the system's capability
to boot with a locked keyboard or without a keyboard. To unlock the keyboard,
enter the power-on password. The default for this setting is disabled.
•
QuickLock—allows you to lock the keyboard and prompts you for the power-on
password to unlock the keyboard. The default for this setting is disabled.
IMPORTANT: If you forget your password, you can clear all passwords by resetting the
system configuration switch. Refer to "System Board Switches" in Appendix E.
7-6 HP ProLiant ML370 Generation 3 Server Setup and Installation Guide