Expansion Slots
The server provides support for installing or connecting peripheral components
through six PCI-X expansion slots. The expansion slots on the system board are
configured as follows:
•
Six 64-bit/100-MHz, full-length PCI-X slots
•
Peak transfer rates of 800 MB per second
•
Peered PCI-X bus architecture
•
Support for peripheral transactions at a clock speed of up to 100 MHz
Integrated SCSI Controller
The server includes a standard Integrated Dual Channel Ultra3 SCSI Controller with:
•
64-bit/66-MHz PCI bus master interface
•
Ultra3 SCSI bus transfer rate with peak transfer rate of 160 MB per second per
channel
•
Two SCSI ports supporting up to six internal hot-plug Wide Ultra2 or Ultra3
SCSI hard drives
•
Optional internal two-bay hot-plug SCSI drive cage for the removable media bay
•
Support for external tape drives and external storage through a VHDCI SCSI
connector on the rear panel
•
Support for hot-plug tape drives and hard drives in six hot-plug SCSI drive bays
•
Support for non-hot-plug tape drives and hard drives in removable media bays
HP ProLiant ML370 Generation 3 Server Setup and Installation Guide
Server Features
1-5