Installing Internet Explorer 4.01 Add-On Components; Using The Ls-120 Superdisk Copy Utility; System Configuration; Configuring The System For The Nec Snmp Agent - NEC POWERMATE ES 5250 - RELEASE NOTES Release Note

Installing Internet Explorer 4.01 Add-On Components

Choosing the Installing Internet Explorer 4.01 Add-On Components option on
the NEC Application and Driver CD results in a file opening error message. Due
to the space these components require, the component files are not included on
the CD. NEC CSD recommends that you run Internet Explorer 4.01, click the
Help menu, and select Product Update. This procedure takes you to the
Microsoft Internet Explorer 4.01 website where you can install these
components.

Using the LS-120 SuperDisk Copy Utility

Using the LS-120 SuperDisk™ Copy utility on 1.44-MB or 120-MB media
intermittently causes system lockups and diskette eject failures. This condition
only occurs when you use the SuperDisk Copy utility supplied with the
SuperDisk Tools diskette shipped with the system.
To safely copy a 1.44-MB diskette, NEC CSD recommends using the standard
®
Microsoft
operating system. You can find the Microsoft Disk Copy program by double
clicking My Computer
displays Copy Disk as one of the available items. Using this Copy Disk program
allows the LS-120 SuperDisk drive to copy 1.44-MB diskettes without system
lockups and allows the drive to eject the 1.44-MB diskette. However, this utility
does not copy 120-MB media.
If you need to duplicate 120-MB media, you must use the SuperDisk Copy
utility. To avoid data loss, make sure you save all data and close all applications
before you attempt to copy 120-MB diskettes with the SuperDisk Copy utility.
To recover from a diskette eject failure or a system lockup after completing the
SuperDisk Copy, restart the system by pressing the power button to turn off the
system. Then press the power button again to turn on system power.
Please call NEC CSD Technical Support services for the updated SuperDisk
Copy utility.

System Configuration

See the following sections for system configuration information.

Configuring the System for the NEC SNMP Agent

TCP/IP must be enabled before you can use the NEC SNMP Agent. See
"Changing Network Settings" in this document to enable TCP/IP. See
"Installing Applications in the Correct Order" in this document and "NEC
SNMP Agent" in Chapter 4 of the PowerMate ES 5250 Series User's Guide for
installation information.
6 NEC PowerMate ES 5250 Series Release Notes
Disk Copy program supplied with the Microsoft Windows
and right clicking the LS-120 icon. The context menu
®