Setting Boot Order in BIOS
To use the CD-ROM drive as a boot device, the BIOS must list it as the first
device. Otherwise, the CD-ROM drive should be second in the boot order.
The system does not boot from a Zip
Configuring the System for the NEC SNMP Agent
TCP/IP must be enabled before the NEC SNMP Agent can be used. See
"Changing Network Settings" in this document for instructions on enabling
TCP/IP. (The NEC SNMP Agent is installed from the NEC Select Install CD.
See "NEC SNMP Agent Installation" in this document for installation
instructions.)
Configuring the System for NEC WebTelligent
TCP/IP must be enabled before NEC WebTelligent
"Changing Network Settings" in this document for instructions on enabling
TCP/IP. (NEC WebTelligent is installed from the NEC Select Install CD. See
"NEC WebTelligent Installation" in this document for installation instructions.)
Configuring the System for Microsoft Internet Explorer
TCP/IP must be enabled before Microsoft Internet Explorer 4.01 can be used.
See "Changing Network Settings" in this documentfor instructions on enabling
TCP/IP. (Internet Explorer is installed from the NEC Select Install CD. See
"Selective Application Restore Program" in this document to install Internet
Explorer.)
Note:
systems with the Windows 98 operating system.
Changing Network Settings
All systems are configured with the NetBEUI and NWLink protocols enabled.
However, before you connect a system to your network you might need to:
T
enable a different network protocol
T
disable unneeded protocols for enhanced system performance
T
add or change network, domain, and gateway information.
The following procedure describes how to disable the NetBEUI and NWLink
protocols, enable TCP/IP, and provide network, domain, and gateway
information. (If a different protocol is enabled, the menu choices may differ
from those described in the procedure.)
1. From the Windows desktop, click
and click
6 NEC PowerMate 8100 Series Release Notes
Internet Explorer 4.01 comes preinstalled on
.
Control Panel
®
drive if it is listed as the first boot device.
™
can be used. See
on the taskbar, point to
Start
,
Settings
Need help?
Do you have a question about the POWERMATE 8100 - RELEASE NOTES and is the answer not in the manual?
Questions and answers