Correcting The Bootmagic Configuration; System Configuration; Configuring The System For The Nec Snmp Agent; Configuring The System For Nec Webtelligent - NEC POWERMATE 2000 - RELEASE NOTES 02-2000 Release Note

Correcting the BootMagic Configuration

If you installed BootMagic in a system with the Windows NT operating system and the
installation resulted in an error message, use the following procedure to correct the configuration
information.
In the Windows Start menu, select
1.
Configuration
Nothing should be listed under the MENU NAME heading in the center of the box.
Click
2. ADD
already highlighted.
Click
3. OK
"Windows NT" listed under MENU NAME.
Check the BootMagic configuration.
4.
T
If you want to use BootMagic:
Click the
bootup sequence and lets you select Windows NT as the operating system.
T
If you do not want to use BootMagic:
Do not select the
at bootup.
5. Select SAVE/EXIT
or to not enable BootMagic, requires the SAVE/EXIT selection.
SAVE/EXIT from the BootMagic Configuration box, even if you do not want to use BootMagic.
Omitting this step results in an error message.

System Configuration

See the following sections for system configuration information.

Configuring the System for the NEC SNMP Agent

TCP/IP must be enabled before you can use the NEC SNMP Agent. See "Changing Network
Settings" in this document to enable TCP/IP. See "Installing Applications in the Correct Order"
in this document and "NEC SNMP Agent" in Chapter 4 of the PowerMate 2000 Series User's
Guide for installation information.

Configuring the System for NEC WebTelligent

TCP/IP must be enabled before you can use NEC WebTelligent. See "Changing Network
Settings" in this document to enable TCP/IP. See "NEC WebTelligent" in Chapter 4 of the
PowerMate 2000 Series User's Guide for detailed installation information.
6 NEC PowerMate 2000 Series Release Notes
Programs
. The BootMagic Configuration box appears.
. The "Bootmagic Add OS" box appears. This is the only option listed and it is
. Click again. The main BootMagic Configuration screen appears with
OK
ENABLE BOOTMAGIC
ENABLE BOOTMAGIC
in the BootMagic Configuration box. Either choice, to enable BootMagic
To correctly complete the BootMagic configuration, you must select
,
PowerQuest BootMagic
button. The BootMagic menu appears during the next
button. The BootMagic menu does not appear
, and
BootMagic