Table of Contents
Advertisement
4.
Check each policy required and highlight the policy name.
For Communities, Traps, and Permitted Managers, click
!
and configure the policy as appropriate.
Highlighting the Internet MIB policy opens the contact name
!
and location fields in the Policy window for editing.
Click
!
File
Click
!
File
Configuring the NEC SNMP Agent for Windows NT
Configure the NEC SNMP Agent for Windows NT as follows.
1.
In the Windows taskbar, click
Control Panel
At the Control Panel, double click the
2.
At the Network screen, click the
3.
4.
At the Select Network Services screen, highlight
click
OK
.
At the Microsoft SNMP Properties screen, set the three properties:
5.
Security — Limits the set of computers than can perform SNMP
!
management on this computer to those in the community and/or
specific computer names the user provides.
Traps — Limits the set of computers that receive traps from this
!
computer to those in the community and/or specific computer
names the user provides.
For an SNMP management console, such as the NEC SNMP
Desktop Manager and HP OpenView, IP addresses (for example,
157.123.176.100) must be entered in the Traps for "Public
Community" to receive traps from the NEC SNMP agents.
For the NEC SNMP Agent to send a trap to the NEC SNMP
Desktop Manager, the port number can be configured from the
registry:
NEC Computer Systems Division\NEC SNMP Desktop
Agent\Port Number"
Agent — Allows the user to specify a contact name and location
!
for the computer.
and click
.
Save
and click
.
Exit
Start
, point to
.
Network
Services
"HKEY_LOCAL_MACHINE\SOFTWARE\
. The default port number is set to 55593.
Managing System Resources 4-19
Show
Settings
, and click
icon.
tab and click
.
Add
SNMP Service
, and
Advertisement
Table of Contents
