Table of Contents
Advertisement
Installing the NEC SNMP Agent
Install the NEC SNMP Agent software on a system with the Windows 98,
Windows 95, or Windows NT operating system as follows.
LANDesk Client Manager on a computer that is running the Windows NT
operating system.
The two applications are incompatible. If both are installed, neither
application can be removed using the uninstall utility. To remove them, a
full restore must be performed.
Close all open applications before installing the NEC SNMP Agent.
1.
2.
Insert the NEC Select Install CD into the CD-ROM drive. Click
Cancel in the screen.
Click Start on the taskbar, point to and click Run, and type
3.
E:\NECUtil\NEC_SNMP\setup.exe where E: is the CD-ROM
drive.
Click OK. Follow the prompts to install the software.
4.
Configuring the NEC SNMP Agent for Windows 95 or
Windows 98
The SNMP Agent is configured with the Windows 95 Policy Editor. The
Policy Editor configures the traps, communities, and other policies.
Use the Policy Editor to configure the traps, communities, and other
policies as follows.
In the Windows taskbar, click Start, and point to Programs,
1.
Accessories, and System Tools. Click System Policy Editor.
At the "System Policy Editor," click File and point to Open
2.
Registry. Double click Local Computer.
Expand Network and expand SNMP to display the list of policies.
3.
The policies are:
Communities — Specifies one or more groups of hosts that this
!
computer belongs to and that can be managed with SNMP.
Do not install both the NEC SNMP Agent and
Managing System Resources 4-11
Advertisement
Table of Contents
