Windows Nt Issues; Restoring Network Card Drivers; Installing Bootmagic In A System With Windows Nt; Configuring Bootmagic - NEC POWERMATE ES 5200 Service Manual

Hide thumbs Also See for POWERMATE ES 5200:
Table of Contents

Advertisement

Windows NT Issues

The following material describes information specific to systems running the
®
Microsoft

Restoring Network Card Drivers

If you are running a system with the Windows NT operating system, use the
following procedure to install either the
drivers from the NEC Application and Driver CD.
1. Locate the entire directory for the network card you are installing in your
system. Copy the entire directory to a local temporary directory.
2. In the Windows NT Control Panel, select
3. Select
4. In the Path windows, type the name of the temporary directory for the
network card files you copied. Click
files for the network card.

Installing BootMagic in a System with Windows NT

BootMagic™ is a utility included in the PowerQuest PartitionMagic™ software.
See "Installing PartitionMagic" earlier in this document for general installation
information.
If you have a Windows NT operating system, use the information in the
following section to correctly configure BootMagic.
If you already installed BootMagic and the configuration resulted in an error
message, see "Correcting the BootMagic Configuration" later in this document.

Configuring BootMagic

If you have a system with the Windows NT operating system, use the following
procedure to correctly configure BootMagic.
1. Follow the instructions in the PartitionMagic Userinfo folder to install
BootMagic. When the "BootMagic Configuration" box appears at the end of
the installation, continue to the next step.
2. Configure BootMagic.
T
If you want to use BootMagic:
Click the
during the next bootup sequence and lets you select Windows NT as the
operating system.
T
If you do not want to use BootMagic:
Do not select the
does not appear at bootup.
A-18 Release Notes
®
Windows NT
operating system.
ADD
and click the
HaveDisk
ENABLE BOOTMAGIC
ENABLE BOOTMAGIC
®
Intel
Pro 100
or
3Com
network
and click
button. A dialog box is displayed.
OK
. Windows NT installs the driver
button. The BootMagic menu appears
button. The BootMagic menu
®
3C905B-TX
adapters
.

Advertisement

Table of Contents
loading

Table of Contents