How To Start Cmos Setup; Cmos Setup Utility Main Menu - NEC POWERMATE ES 5200 Service Manual

T
check the installation of optional memory by comparing the amount of
memory installed with the amount of memory displayed by Setup
T
change certain operating parameters, such as boot device sequence and
keyboard parameters
T
configure system connections for peripherals such as diskette drive, hard
drives, and devices connected to the printer port and serial ports
T
customize the system with security features such as passwords, diskette
drive restriction, virus check reminder, and system backup reminder
T
set system parameters after the CMOS battery is replaced.
Note:
Utility, it overrides the JP1 jumper setting.

How to Start CMOS Setup

To start the CMOS Setup Utility, follow these steps:
1. Turn on or reboot the system.
2. Press
F2
Press [ESC] to show POST, [F2] to enter SETUP.
You have about five seconds to press
3. Setup's Main menu appears and looks similar to the following screen.
A – Menu Title
B – Selected Menu Item
C – Menu Items
2-8 System Configuration
If a Power On mode is set in the CMOS Setup
as soon as you see this message:

CMOS Setup Utility Main Menu

D – Navigation Keys
E – Description of Selected Menu Item
F2 before the system boot continues.