Table of Contents
Advertisement
Finding No Network Neighborhood Icon on the Desktop
The Windows 98 desktop does not display a Network Neighborhood icon when
you boot the system into Windows 98. The 3Com 3C905B-TX drivers are
preinstalled on the system and no protocols are loaded. This configuration does
not display the Network Neighborhood icon on the desktop. See "Changing
Network Settings" in this document to configure your system.
Windows NT Issues
The following material describes information specific to systems running the
®
Microsoft
Installing TCP/IP Protocol
Use the following procedure to correctly install TCP/IP in Windows NT 4.0
Workstation.
1. Right click the
2. In the Network dialog box, left click the
3. Click
yes
not you choose DCHP.
The Windows Setup dialog box appears, indicating Windows will look for
files to copy in the location below, which is G:\I386, or that you can type in
the location for Windows to look for it.
4. DO NOT choose G:\I386. Instead, TYPE
5. Continue with the TCP/IP installation in the normal way.
Restoring Network Card Drivers
If you are running a system with the Windows NT operating system, use the
following procedure to install either the
drivers from the NEC Application and Driver CD.
1. Locate the entire directory for the network card you are installing in your
system. Copy the entire directory to a local temporary directory.
2. In the Windows NT Control Panel, select
3. Select
4. In the Path windows, type the name of the temporary directory for the
network card files you copied. Click
files for the network card.
®
Windows NT
operating system.
Network Neighborhood
or
no
in the TCP/IP Setup Dialog Box depending on whether or
ADD
and click the
HaveDisk
NEC PowerMate VT 300 Series Release Notes 13
icon on the Windows desktop.
Protocols
tab. Click
C:\
I
386
and click
®
Intel
Pro 100
or
3Com
and click
network
button. A dialog box is displayed.
OK
. Windows NT installs the driver
Add
.
continue
.
®
3C905B-TX
.
adapters
Advertisement
Table of Contents
