Uninstalling The Nec Snmp Agent Or Landesk Client Manager; When Both Nec Snmp Agent And Landesk Client Manager Are Installed - NEC POWERMATE ES 5200 Service Manual

The following note replaces the notes describing traps in the "NEC SNMP
Agent" sections in Chapter 4 of your PowerMate ES 5200 Series User's Guide:
Note:
NEC SNMP Desktop Manager and HP OpenView, IP
addresses (for example, 157.123.176.100) must be entered
in the Traps for "Public Community" to receive traps from the
NEC SNMP agents.
For the NEC SNMP Agent to send a trap to the NEC SNMP
Desktop Manager, the port number can be configured from
the registry: "HKEY_LOCAL_MACHINE\SOFTWARE\
NEC Computer Systems Division\NEC SNMP Desktop
Agent\Port Number". The default number is set to 55593.

Uninstalling the NEC SNMP Agent or LANDesk Client Manager

LANDesk Client Manager and the NEC SNMP Agent are not fully compatible
when both are installed on the same computer.
Do not install both the NEC SNMP Agent and LANDesk
Client Manager on the same computer.

When Both NEC SNMP Agent and LANDesk Client Manager Are Installed

If both applications have been installed, LANDesk Client Manager does not
function correctly, and cannot display ASIC-related tabs for temperature, fan,
voltage, and chassis intrusion status.
In addition, each time the computer is restarted, a Service Control Manager
window displays an error message and prompts the user to press
If LANDesk Client Manager and the NEC SNMP Agent have
both been installed, it is not possible to remove either
application using the uninstall utility. A full operating system
restore must be performed using the NEC OS Restore CD.
If LANDesk Client Manager and the NEC SNMP Agent have both been
installed, it is not possible to remove either application using the uninstall
utility. If you attempt to remove one of the applications, you must perform a full
operating system restore using the NEC OS Restore CD.
After the full restore, reinstall all appropriate applications from the NEC
Application and Driver CD. Do not reinstall both LANDesk Client Manager and
the NEC SNMP Agent.
For an SNMP management console, such as the
! CAUTION
! CAUTION
Enter .
Release Notes A-5