Pc Adapter Device Specifications; Tape Backup Unit Specifications - NEC POWERMATE ES 5200 Service Manual

Hide thumbs Also See for POWERMATE ES 5200:
Table of Contents

Advertisement

PC Adapter Device Specifications

The specifications for the PC adapter device are included in the following table.
Feature
PCMCIA device
Hardware
Card Sockets
Card Configurations
Controller
Software
Functionality

Tape Backup Unit Specifications

The specifications for the tape backup unit are included in the following table.
Feature
Tape Backup Unit
Capacity
Effective Backup Rate
Data Transfer Rate
Tape Speed
Read/Write
Search/Rewind
Recording Method
Recording Format
Recording Code
10-10 Specifications

PC Adapter Device Specifications

Specification
SCM SwapBox
PnP 16-bit PC-AT interface card connecting to a 3.5-inch drive
bay with twin PC Card sockets
2
Two Type I/II cards or
One Type I/II card and one Type III
ExCA-compatible PCMCIA VG469 controller; Intel register,
step B compatible
SwapFit Flash Filing system driver enabling full floppy disk or
hard drive emulation on flash cards; compatible with all
compression and PC-utilities software
Single drive letter designator for all memory cards
Graphical installation and formatting utilities
Supports ISA Plug and Play
Supports mixed voltage (3V) cards
Vcc and Vpp Matrix: Micrel MTC2563

Tape Backup Unit Specifications

Specification
Seagate CTT8000 IDE Minicartridge Drive
4.0 GB (900 Oe 740' Travan cartridge, uncompressed)
8.0 GB (900 Oe 740' Travan cartridge, compressed)
30 MB/min typical native
45 MB/min typical compressed
300/450/600 KB/second Fast Sense
33, 51, or 77 ips
90 ips max
Serpentine
QIC-3095-MC
1,7 RLL
PC Card Host X2P ISA

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the POWERMATE ES 5200 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Table of Contents