Table of Contents
Advertisement
4. Remove the screw securing the cover to the chassis.
T
For the left side cover, remove the screw securing the back edge of the
cover to the chassis (see the following figure).
T
For the right side cover, remove the screw inside the system that secures
the right cover tab to the chassis bracket (see the second figure below).
Position the screwdriver through the hole in the back left edge of the
chassis to gain access to the screw.
If necessary, remove the hard drive bracket to access to the right side
cover screw (see "Removing a 3 1/2-Inch Hard Drive — Minitower").
Locating the Top and Left Side Cover Screws — Minitower
A – Top Cover Screw
Locating the Right Side Cover Screw — Minitower
A – Chassis Bracket
B – Right Side Cover Tab
B – Left Side Cover Screw
C – Screwdriver Hole
D – Screw
Disassembly and Reassembly 3-9
Advertisement
Table of Contents
