Windows Nt Issues; Installing Tcp/Ip Protocol; Restoring Network Card Drivers - NEC POWERMATE ES 5250 - RELEASE NOTES Release Note

3. Left click the
down choices appear.
4. Highlight
lower left corner of the dialog box. The installation program installs the
driver.
5. Click
exit
6. Remove the CD from the CD-ROM drive. Reboot the system.

Windows NT Issues

The following material describes information specific to systems running the
®
Microsoft

Installing TCP/IP Protocol

Use the following procedure to correctly install TCP/IP in Windows NT 4.0
Workstation.
1. Right click the
2. In the Network dialog box, left click the
3. Click
yes
not you choose DCHP.
The Windows Setup dialog box appears, indicating Windows will look for
files to copy in the location below, which is G:\I386, or that you can type in
the location for Windows to look for it.
4. DO NOT choose G:\I386. Instead, TYPE
5. Continue with the TCP/IP installation in the normal way.

Restoring Network Card Drivers

If you are running a system with the Windows NT operating system, use the
following procedure to install either the
drivers from the NEC Application and Driver CD.
1. Locate the entire directory for the network card you are installing in your
system. Copy the entire directory to a local temporary directory.
2. In the Windows NT Control Panel, select
3. Select
4. In the Path windows, type the name of the temporary directory for the
network card files you copied. Click
files for the network card.
16 NEC PowerMate ES 5250 Series Release Notes
next to "CDROM Support in DOS" in the dialog box. Drop
+
Installation with a left mouse click. Then click
.
®
Windows NT operating system.
Network Neighborhood
or in the TCP/IP Setup Dialog Box depending on whether or
no
ADD and click the HaveDisk
icon on the Windows desktop.
tab. Click
Protocols
C:\ I 386 and click
®
Intel Pro 100 or 3Com
and click
network
button. A dialog box is displayed.
OK . Windows NT installs the driver
Install in the
.
Add
continue .
®
3C905B-TX
.
adapters