Table of Contents
Advertisement
Note:
NEC SNMP Desktop Manager and HP OpenView, IP
addresses (for example, 157.123.176.100) must be entered
in the Traps for "Public Community" to receive traps from the
NEC SNMP agents.
For the NEC SNMP Agent to send a trap to the NEC SNMP
Desktop Manager, the port number can be configured from
the registry:
NEC Computer Systems Division\NEC SNMP Desktop
Agent\Port Number"
55593.
T
Agent — Allows the user to specify a contact name and location for the
computer.
6. Edit the properties.
7. Click
OK
8. Click
Close
NEC Configuration Change Notification
NEC Configuration Change Notification is an application that runs as Windows
starts. It works with the LANDesk application and DMI (Desktop Management
Interface) software to determine if there has been a change in the processor,
main memory, or hard drive since the last startup. A message appears on the
screen when a change is detected.
Install NEC Configuration Change Notification from the NEC Application and
Driver CD. For installation information, see "Installing ToolTelligent Utilities."
NEC Auto Backup Utility
The NEC Auto Backup utility works with LANDesk Client Manager and
Cheyenne Backup to detect predicted hard drive failures and to automatically
back up the data from the failing drive. The utility only works with SMART
hard drives and it requires both LANDesk Client Manager and Cheyenne
Backup to function.
The Auto Backup utility runs from the Startup group on the Windows Start
menu. The utility has some configuration options that are accessible through the
system tray icon. The NEC Tools group on the Start menu includes a ReadMe
file containing recent information about the utility as well as access to a Help
document.
Cheyenne Backup configuration determines the exact nature of the backup that
will be performed automatically. See the online Help for Cheyenne Backup
Configuration for information about available options.
Install the NEC Auto Backup Utility from the NEC Application and Driver CD.
For installation information, see "Installing ToolTelligent Utilities."
For an SNMP management console, such as the
"HKEY_LOCAL_MACHINE\SOFTWARE\
. The default port number is set to
to return to the Network screen.
to return to the Windows screen.
System Configuration 2-33
Advertisement
Table of Contents
