Table of Contents
Advertisement
Locating the Front Panel Posts and Locking Tabs — Desktop
A – Locking Tabs
3. Once the locking tabs are free, pull the front panel away from the chassis.
4. Identify the bay on the front panel for the device being installed.
5. Remove the blank plastic panel from the selected bay by pressing the panel
tabs from inside the front panel and pushing the blank panel out (see the
following figure).
6. If a metallic shield covers the opening in the chassis, remove it.
7. Install the device (see "Installing a 5 1/4-Inch Device — Small Desktop or
Desktop" or "Installing an Additional 3 1/2-Inch Device — Desktop").
Locating the Blank Panel Tabs — Desktop
A – Blank Panel Tabs
B – Posts
Disassembly and Reassembly 3-17
Advertisement
Table of Contents
