Utilities
The following table lists each utility and application shipped with the system,
and the page where its description is found.
Utility
FLASH Utility
LANDesk Client Manager
Cheyenne Backup
NEC ToolTelligent Suite
NEC WebTelligent
NEC SNMP Agent
NEC Configuration Change Notification
NEC Auto Backup Utility
FLASH Utility
The system BIOS resides on a flash read only memory (ROM) chip in your
system. Update the Flash ROM with a BIOS flash diskette. The diskette
contains the latest version of the BIOS code. You can get the diskette from NEC
CSD or download the BIOS from the NEC CSD website or Bulletin Board
System (BBS).
Update the BIOS from the BIOS flash diskette as follows.
Perform a flash ROM update with the guidance of a NEC
CSD support technician. See Section 9 for information about
getting support.
1. Write down the CMOS Setup parameters currently set on the system.
2. Contact NEC CSD support for instructions on downloading the BIOS code
and on performing the flash ROM update.
3. Turn off the system.
4. Put the flash diskette in drive A and turn on the system. The Flash Memory
Writer menu appears. Do not touch any keys unless directed to do so.
System Utilities
! CAUTION
See Page
2-19
2-20
2-24
2-24
2-25
2-30
2-33
2-33
System Configuration 2-19