When Landesk Client Manager Is Installed Without The Nec Snmp Agent; Configuring The System For The Nec Snmp Agent; Configuring The System For Nec Webtelligent; Configuring The System For Microsoft Internet Explorer - NEC POWERMATE ES 5200 Service Manual

When LANDesk Client Manager Is Installed Without the NEC SNMP Agent

You can use the uninstall utility to remove LANDesk Client Manager if the
NEC SNMP Agent has not been installed on the system. When you uninstall
LANDesk Client Manager, do not interrupt the uninstall process or power off
the system. The uninstall utility displays a message box indicating that the
uninstall process takes 10 minutes or longer to completely remove LANDesk
Client Manager.
Note:
Configuration Change Notification and NEC Auto Backup,
require the installation of LANDesk Client Manager. If you
remove LANDesk Client Manager, also remove the NEC
Management Tools to prevent error message reports.
If you interrupt the uninstall process or power off the system, you cannot use the
uninstall utility to remove the LANDesk application. You must then use the
NEC Select Install CD to perform a full operating system restore. After the full
restore, you must reinstall all appropriate applications from the NEC Driver CD
using the Selective Application Restore program or a Setup.exe program.

Configuring the System for the NEC SNMP Agent

TCP/IP must be enabled before you can use the NEC SNMP Agent. See
"Changing Network Settings" in this document to enable TCP/IP. See
"Installing NEC SNMP Agent Installation" in this document for installation
information.

Configuring the System for NEC WebTelligent

TCP/IP must be enabled before you can use NEC WebTelligent. See "Changing
Network Settings" in this document to enable TCP/IP. See "NEC WebTelligent"
in Chapter 4 of the PowerMate ES 5200 Series User's Guide for detailed
installation information.

Configuring the System for Microsoft Internet Explorer

TCP/IP must be enabled before you can use Microsoft Internet Explorer 4.01.
See the next section, "Changing Network Settings," to enable TCP/IP. Install
Internet Explorer from the NEC Application and Driver CD.
Note:
systems with the Windows 98 operating system.
A-6 Release Notes
NEC Management Tools, such as the NEC
Internet Explorer 4.01 comes preinstalled on