Locating The Cover Screw - Small Desktop - NEC POWERMATE ES 5200 Service Manual

Note:
logs the intrusion and reports it in a screen message the
next time the system is booted. This message appears every
time the system is rebooted until the report is cleared. For
more information on closing the notification window and
clearing the message, see "Using the Chassis Intrusion
Notification Feature" in Section 2.
1. Turn off and unplug the system unit.
2. Disconnect the keyboard, mouse, monitor, and any other external options
(such as speakers or a printer) from the rear of the system unit.
Electrostatic discharge can damage computer components.
Discharge static electricity by touching a metal object before
removing the system unit cover.
3. Remove any lock or security cable (if one has been installed).
4. Remove the cover screw(s) on the rear of the system (see the following
figures).
T
For a small desktop system, remove the single screw.
T
For a desktop system, remove the two screws.
A – Cover Screw
3-4 Disassembly and Reassembly
If the cover is removed, LANDesk Client Manager
! CAUTION
Locating the Cover Screw — Small Desktop