Show Mac-Address-Table Multicast - SMC Networks 8748L2 Management Manual

Command Usage
See "Configuring IGMP Snooping and Query Parameters" on page
3-165 for a description of the displayed items.
Example
The following shows the current IGMP snooping configuration:
Console#show ip igmp snooping
Service status:
Querier status:
Query count:
Query interval:
Query max response time: 10 sec
Router port expire time: 300 sec
IGMP snooping version:
Console#

show mac-address-table multicast

This command shows known multicast addresses.
Syntax
show mac-address-table multicast [vlan vlan-id]
[user | igmp-snooping]
• vlan-id - VLAN ID (1 to 4093)
• user - Display only the user-configured multicast entries.
• igmp-snooping - Display only entries learned through IGMP
snooping.
Default Setting
None
Command Mode
Privileged Exec
Command Usage
Member types displayed include IGMP or USER, depending on
selected options.
M
ULTICAST
Enabled
Disabled
2
125 sec
Version 2
F C
ILTERING OMMANDS
4-223