Show Mac Access-List; Mac Access-Group - SMC Networks 6152PL2 Management Manual

4
Command Line Interface
This command binds a port to a MAC ACL. Use the no form to remove the port.
Syntax
mac access-group acl_name in
• acl_name – Name of the ACL. (Maximum length: 16 characters)
• in – Indicates that this list applies to ingress packets.
Default Setting
None
Command Mode
Interface Configuration (Ethernet)
Command Usage
• A port can only be bound to one ACL.
• If a port is already bound to an ACL and you bind it to a different ACL, the
switch will replace the old binding with the new one.
Example
Related Commands

show mac access-list (4-217)

This command shows the ports assigned to MAC ACLs.
Command Mode
Privileged Exec
Example
Related Commands

mac access-group (4-218)

4-218
in