Punch, Punchhole - Ricoh Aficio 2232C User Manual

Punch, Punchhole

Specify the punch position and the number of punch holes.
Limitation
❒ Before executing the "punch" command, make sure the number of collated
sets, the output tray, and number of punch holes is specified.
❒ When using this option, the optional finisher unit is required.
❒ When printing with this option, be sure to specify the optional finisher using
"finisherproof" or "finishershift" as the value, for example "outbin=finisher-
proof". For more information about the optional finisher unit, see p.25 "Out-
put Tray".
Note
❒ Available punch positions may vary depending on the type of output tray
you have installed. For more information about punching, see Printer Refer-
ence 2 (PDF file) on the CD-ROM labeled "Operating Instructions for Printer
/ Scanner".
❒ When "punchhole" is not specified, the machine executes the punch function
using the default number of punch holes. The default number of punch holes
is marked with "*" in the table below.
❒ If "punchhole" is not specified correctly, the machine does not execute the
function.
punch=value of punch position
Position
Off
Left
Right
Top
punchhole=value of punchhole
Available numbers of punch holes may vary depending on the type of Punch Kit
you have installed. Specify an appropriate value referring to the table below.
Number of punch holes
2
3
4
Value
off
leftport leftland
rightport rightland
topport topland
Name of punch kit
Punch Kit Type 1045 EU
Punch Kit Type 1045 NA
Punch Kit Type 1045 EU
Punch Kit Type 1045 SC
Specifying the Device Option
Value
jp2
us2
us3
eu4
neu4
1
31