Deleting A Keystroke Program - Ricoh 185 Operating Instructions Manual

B
Press the Quick Dial key pro-
grammed with the Keystroke Pro-
gram.
In this example, the fax number
and program name "Send Later"
are shown on the display.
C
Press the [OK] key then the { { { { Start} } } }
key.
The machine starts scanning the
original.
The message will be sent at the
specified time.

Deleting a Keystroke Program

Limitation
When a registered program is be-
ing used for a standby Memory
Transmission, the message
destination is in use for
standby transmission
Please modify/delete
transmission"
cannot delete the program.
Note
If you delete a program, the regis-
tered program name is also delet-
ed.
A
Make sure that the machine is in
Facsimile mode and the standby
display is shown.
"This
file.
after
is shown and you
REGISTER/DELETE MENU
Note
If the standby display is not
shown, press the {Fax} key.
B
Press the { { { { User Tools/Counter} } } } key.
C
Enter the number of the "Fax".
The Facsimile User Tool main
menu appears.
Reference
For how to use the System User
Tools, refer to the System Set-
tings manual.
D
Enter the function number for
"Register/Delete" using the num-
ber key.
E
Enter the function number for
"Delete Program" using the num-
ber keys.
F
Press the Quick Dial containing
the program you wish to delete.
The contents of the program are
shown on the display.
7
135