Duplex; 1 Sided → → → → 2 Sided - Ricoh Aficio 1022 Operating Instructions Manual

Copying

Duplex

The optional Duplex unit is required to use this function.
This function can be used in two
ways:
❖ ❖ ❖ ❖ 1 Sided → → → → 2 Sided
2
This mode makes two-sided copies
from one-sided originals.
❖ ❖ ❖ ❖ 2 Sided → → → → 2 Sided
This mode makes two-sided copies
from two-sided originals.
Limitation
❒ You cannot use the following copy
paper with this function:
• Paper smaller than A5
× 8
1
/
2
" × 8
1
5 /
2
• Paper thicker than 90g/m
lb.
• Paper thinner than 64g/m
lb.
• Translucent paper
• Label paper (adhesive labels)
• OHP transparencies
• Postcards
❒ You cannot use the bypass tray
with this function.
❒ The function might not work for
certain types of large size originals
(such as A3, 11" × 17"). In this case,
an optional 32MB memory or
HDD is required.
88
K , 5
K (possible on A5 L ,
"
1
L )
/ "
2
1 Sided → → → → 2 Sided
1
1
/ "
2
Note
❒ If you set an odd number of 1-sid-
ed originals in the document feed-
2
, 24
er, the reverse side of the last page
is left blank.
2
, 20
❒ When original images are copied,
the images are shifted by the width
of the binding margin. You can ad-
just the binding margin or binding
position. You can also change their
default values. ⇒ "Front Margin:
L e f t / R i g h t " , " B a c k M a r g i n :
L e f t / R i g h t " , " F r o n t M a r g i n :
Top/Bottom " and "Back Margin:
Top/Bottom" on p.194 "Edit
❒ By default, a binding margin is
made on the back side. You can
change the value of this setting. ⇒
"1 sided → 2 sided Auto Margin: T
to T" on p.194 "Edit
2 1
2
1
/ "
2
1
/ "
2