Directional Size Magnification (Inch) - Ricoh Aficio 1022 Operating Instructions Manual

Directional Size Magnification (Inch)

The suitable reproduction ratios will
be automatically selected when you
enter the horizontal and vertical
lengths of the original and copy im-
age you require.
1
2
1: Horizontal original size
2: Vertical original size
3: Horizontal copy size
4: Vertical copy size
Preparation
Specify the vertical and horizontal
sizes of the original and those of the
copy, as shown in the illustration.
Limitation
❒ If the calculated ratio is over the
maximum or under the minimum
ratio, it is adjusted to within the
available range of ratios automatical-
ly. However, with some ratios, parts
of the image might not be copied or
margins will appear on copies.
Note
❒ You can enter sizes within the fol-
lowing ranges.
Metric Vertical: 1 – 999mm (in 1mm
version steps)
Horizontal: 1 – 9999 (in 1mm
steps)
Inch 0.1" – 99.9" (in 0.1" steps)
version
❒ The reproduction ratios that you
can specify are 25-400% (25-200%
when placing originals in the doc-
ument feeder).
A A A A
Press the [Reduce/Enlarge] key.
3
4
CP2M01EE
B B B B
Press the [Specifd. Ratio] key.
C C C C
Press the [Dirc.Size Mag.In] key.
D D D D
Enter the horizontal size of the
original with the number keys,
and then press the [#] key.
❒ To change the value entered,
Directional Size Magnification (Inch)
Note
press the [Clear] or
key and enter the new value.
2
{ { { { Clear/Stop } } } }
83