Slip Sheets - Ricoh Aficio 1022 Operating Instructions Manual

Slip Sheets

Every time the originals' page chang-
es, a slip sheet is inserted. This func-
tion can be used to insert a slip sheet
automatically between each OHP
transparency copied or used as a
stack function. You can also copy
onto the inserted slip sheets.
Preparation
Before selecting this function,
specify the paper tray for slip
sheets. ⇒ "Slip Sheet 1", "Slip Sheet
2" in the System Settings manual
Limitation
❒ You cannot use this function with
Chapters and Paper Designate
modes.
Note
❒ The trays to be used in the Slip
Sheets function are those pro-
grammed in "Slip Sheet 1" and
"Slip Sheet 2" in the System Set-
tings.
❒ Load the slip sheets in the same
orientation as the originals.
❒ You can specify whether to copy
onto the inserted slip sheets or not.
❒ If you do not copy onto slip sheets,
t h e y a r e e x c l u d e d f r o m t h e
number of copies counted.
When using OHP transparencies
set on the bypass tray
❖ ❖ ❖ ❖ Copy
2
1
❖ ❖ ❖ ❖ Blank
2
1
Note
❒ Press the { { { { # } } } } key and set the "Spe-
cial Paper" setting to [OHP Sheet].
⇒ p.57 "When copying onto stand-
ard size paper"
A A A A
Press the [Cover/Slip Sheet] key.
Slip Sheets
2
2 2 2
1
1 1
2
1 1
149