Mixing Scan Settings For A Multiple - Ricoh Aficio 1022 Operating Instructions Manual

Faxing
Mixing Scan Settings for a
Multiple Page Original
When sending an original consisting
of several pages, you can select differ-
ent Image Density, Resolution and
Original Mode settings for each page.
2
Place your original, select the scan
settings for the first page, dial and
press the { { { { Start} } } } key as you would
normally. Then follow one of the fol-
lowing two procedures.
Note
❒ It is recommended that originals
are placed on the exposure glass
when mixing scan settings for a
multiple page original.
When placing originals on the exposure
glass
While the machine is beeping, you
have about 60 seconds (10 for Imme-
diate Transmission) to select density,
resolution and original mode. The re-
maining time is shown on the display.
A A A A
Check which pages you wish to
scan with different settings.
B B B B
Remove the previous page and
place the next page.
C C C C
Select the Image Density, Resolu-
tion and Original Mode.
Note
❒ Adjust settings for each page
before you press the { { { { Start} } } } key.
40
When placing originals in the document
feeder (ADF)
A A A A
Check which pages you wish to
scan with different settings.
B B B B
Select the Image Density, Resolu-
tion and Original Mode before
the next page is scanned.