Cover/Slip Sheet; Front Cover - Ricoh Aficio 1022 Operating Instructions Manual

Copying

Cover/Slip Sheet

Using this function, you can add cov-
er sheets or designate certain pages to
be copied on slip sheets.
There are four types of this function:
2
❖ ❖ ❖ ❖ Front Cover
The first page of your originals is
copied on a specific paper sheet for
covers.
❖ ❖ ❖ ❖ Front/Back Cover
The first and last pages of your
originals are copied on specific pa-
per sheets for covers.
❖ ❖ ❖ ❖ Paper Designate
Use this function to have certain
pages of your originals copied
onto slip sheets.
❖ ❖ ❖ ❖ Chapter
If you specify the first page of each
chapter with this function, those
pages will always appear on the
front of copies when using 1 sided
→ 2 sided mode.
Preparation
Before selecting this function, set
the tray for front cover paper and
slip sheet paper. ⇒ "Cover", "Slip
Sheet 1" and "Slip Sheet 2" in the
System Settings manual
The cover or slip sheets should be
the same in size and direction as
the copy paper.
Limitation
❒ You cannot set the copy paper in
the bypass tray. Only set the cover
or slip sheets in the bypass tray.
Note
❒ If Blank mode is selected, the cover
will not be counted as a copy.
142

Front Cover

The first page of your originals is cop-
ied on specific paper sheet for covers,
or a cover sheet is inserted before the
first copy.
❖ ❖ ❖ ❖ Copy
3
2
1
❖ ❖ ❖ ❖ Blank
3
2
1
Note
❒ You can specify whether to make a
copy on the cover sheet. If you se-
lect [Copy], the first page will be
copied on the cover sheet. If you
select [Blank], a cover sheet will just
be inserted before the first copy.
❒ When choosing [Copy], select wheth-
er the front and back covers are cop-
ied single-sided ("1 Sided Only") or
double-sided ("Duplex Copy"). ⇒
"Cover" in the System Settings man-
ual
3
2
1
3
2
1