Ricoh Aficio 1022 Operating Instructions Manual page 451

Messages/Second messages
Paper size and type are mis-
matched. Select another tray
from the following and press
[Continue]. To cancel the job,
press [Reset]. Paper size and
type can also be changed in
User Tools.
Paper size and type of # are
mismatched. Select another
tray from followings and
press [Continue]. To cancel
job, press [Reset]. Paper size
and type can also be changed
in User Tools.
Paper size of # is mis-
matched. Select another tray
from followings and press
[Continue]. To cancel job,
press [Reset]. Paper type can
also be changed in User
Tools.
Paper type of # is mis-
matched. Select another tray
from followings and press
[Continue]. To cancel job,
press [Reset]. Paper type can
also be changed in User
Tools.
Parallel I/F board has a prob-
lem. Call service representa-
tive.
Please wait.
Printer is in use. Try again af-
ter the job is completed.
Printing...
Print overrun.
Ready
Reset # correctly, or select an-
other tray and press [Contin-
ue].
Reset duplex unit correctly. If
the error appears again, call
service representative.
Descriptions and Solutions
Using the auto tray selection function, a tray of the matching pa-
per size and type is not found. Select another paper tray, change
the paper size by using the paper size dial on the tray or paper
size setting on the menu, and then change the paper type of the
selected tray by using the paper type setting on the menu. Oth-
erwise, press [Form Feed], specify another paper tray, and then
press [Continue] or [Reset].
The paper size and type of selected paper tray differ from the
specified paper size and type. Change the paper size of the se-
lected tray by using the paper size dial on the tray or paper size
setting on the menu, and then change the paper type of the se-
lected tray by using the paper type setting on the menu. Other-
wise, press [Form Feed], specify another paper tray, and then
press [Continue] or [Reset].
The paper size of the selected paper tray differs from the speci-
fied paper size. Change the paper size of the selected tray by us-
ing the paper size dial in the tray or the paper size setting on the
menu. Otherwise, press [Form Feed], specify another paper
tray, and then press [Continue] or [Reset].
The paper type of the selected paper tray differs from the spec-
ified paper type. Change the paper type of the selected tray by
using the paper type setting on the menu. Otherwise, press
[Form Feed], specify another paper tray, and then press [Con-
tinue] or [Reset].
Parallel I/F board has a problem. Contact your service repre-
sentative.
The machine is warming up or setting the toner.
The system settings menu cannot be displayed because data
processing is in progress.
Wait for a while.
Try installing an SDRAM module. When doing this, contact
your service representative.
The machine is online and ready to make prints.
If you want to take the machine offline, press [Online].
The selected paper tray (current tray) is not found. It has not
been set or is set incorrectly. Set the paper tray correctly.
The optional Duplex Unit is not set correctly.
An error has occurred in the Duplex Unit.
Set the optional Duplex Unit correctly. If the message appears
again, call your sales or service representative.
Error & Status Messages on the Display Panel
4
39