Ricoh Aficio 1022 Operating Instructions Manual page 468

Using the Control Panel
Menu
Memory Usage
Edge Smoothing
5
Resolution
Toner Saving
56
You can select the volume of memory to be used in the "Font Pri-
ority" or "Frame Priority", according to the paper size or resolu-
tion.
• Font Priority
This setting uses memory for registering fonts.
• Frame Priority
This setting uses frame memory for high speed printing.
Note
❒ Default: Frame Priority
You can set whether or not to enable "Edge Smoothing".
• On
• Off
Note
❒ Default: On
❒ If "Toner Saving" is "On", "Edge Smoothing" is ignored even
if it is "On".
You can set the print resolution in dots per inch.
❖ ❖ ❖ ❖ PCL 5e
300 dpi, 600 dpi
❖ ❖ ❖ ❖ PCL 6
600 dpi
❖ ❖ ❖ ❖ PS
300 dpi, 600 dpi
Note
❒ Default: 600 dpi
❒ The PCL 6 can only be set to 600 dpi.
You can select whether or not to enable "Toner Saving".
• On
• Off
Note
❒ Default: Off
❒ If "Toner Saving" is "On", "Edge Smoothing" is ignored even
if it is "On".
Description