Turning On The Power; Turning Off The Power - Ricoh Aficio 1022 Operating Instructions Manual

Basics

Turning On the Power

A A A A
Press the operation switch to
1
make the On indicator go on.
The display panel will come on.
Note
❒ If the power is not turned on
when the operation switch is
pressed, check if the main pow-
er switch is on. If off, turn it on.
❒ The machine will be ready for
use within 10 seconds of being
turned on.
❒ If the user code dialog box ap-
pears on the display panel in-
stead of the copier display,
enter a registered user code, and
then click the [#] key. See p.86
"User Code".
10

Turning Off the Power

A A A A
Make sure that the exposure glass
or the document feeder is in the
right position.
B B B B
Press the operation switch to
make the On indicator go off.
ZFFH120N
Note
❒ Even if you press the operation
switch, the indicator does not
go off and blinks in the follow-
ing cases:
• When the exposure glass or
the document feeder is open
• When communication is in
p r o g r e s s w i t h e x t e r n a l
equipment
• When the hard disk is oper-
ating
ZFFH120N