Ricoh Aficio 1022 Operating Instructions Manual page 647

H H H H
Press [Exit].
I I I I
Press [Exit].
The machine will return to standby
mode.
- - Programming the Group as a - -
Transfer Station of a Multi-Step
Transfer
A Group can be programmed as a
Transfer Station of a Multi-Step
Transfer. You should program the re-
ceiving stations when you program
the group as a Transfer Station.
For more information, contact your
service representative.
Limitation
❒ If you want to program a group
which has been programmed as a
Transfe r St atio n as a norm al
group, delete the group and pro-
gram again.
❒ Only one group can be pro-
grammed as a Transfer Station.
Follow step A to F in "Program-
A
ming Groups".
B Press [Adv. Features].
C Press [Transfer Req.].
D Press [Receiving Station].
E
Specify the receiving station.
Note
❒ When you specify the receiving
station with Quick Dial, press
[Quick Dial] and enter the Group
Dial number using the number
keys.
❒ When you specify the receiving
station with Group Dial, press
[Group Dial] and enter the Group
Dial number using the number
keys.
F After specifying all of the receiving
stations, press [OK].
G Press [OK].
H
Press [Exit] twice.
Reference
⇒ Chapter 5, "Reception Func-
tions" in the Advanced Features
manual
Groups
3
65