Ricoh Aficio 1022 Operating Instructions Manual page 459

Status
When printing graphic data, the
output and the screen are differ-
ent to some extent.
One page is printed halfway
and ejected, and the data of that
page continues to be printed on
the next page.
The Page Layout is shifting.
The paper comes out from a dif-
ferent tray than expected.
Duplex printing is malfunction-
ing.
When using Windows
95/98/Me, Windows 2000, or
Windows NT4.0, either forced
printing or bookbind printing
cannot be set.
When using Windows
95/98/Me, Windows 2000, or
Windows NT4.0, doubling of
the paper settings is not possi-
ble.
Vertical and horizontal are
printed reversed.
When stapling and printing
documents which have different
sizes and paper directions, sta-
pling does not occur correctly.
Possible Causes, Descriptions, and Solutions
If the printer driver is configured to use the graphics com-
mand, the command from the machine is used to print.
If you want to print accurately, set the printer driver to print
without using the graphics command.
It is possible that the configuration of the [Automatic Paper
Ejection Time] in the Printer Initialization setting has been set
too short. Set it to [None] or for a longer time.
Print areas differ according to the printer used. The informa-
tion that fits on one page on one machine may not fit on one
page of another machine.
Adjust the [Print Area] settings in the printer driver.
The paper tray set in the printing conditions or the print driv-
er has priority over the paper tray set in the [Paper Select]
function in the control panel.
Set correctly the print conditions or the printer driver.
• Duplex printing cannot be done with paper set in the
manual tray.
When using duplex printing, correct the settings to use
paper from a tray other than the manual tray.
• Duplex printing cannot be done with thick paper, OHP
transparencies, labels, or thin paper specified as the pa-
per type. Specify another paper type.
• Duplex printing cannot be done with a tray for which [1
Sided Copy] has been specified for "Paper Type" on the
System Settings menu. Change the "Paper Type" setting
for the tray to [2-Sided Copy] on the System Settings menu.
See the System Settings manual.
Make sure that the paper set in the application has the same
size and direction as in the [Accessories].
If a different paper size and direction are set, choose the same
size and direction.
It is possible that the printer condition's original direction is
not correctly set. Make sure that it has been correctly set.
Documents which have different sizes and paper directions
may not be stapled as expected depending on the location of
the staples.
Other Printing Problems
4
47