Specifications - Ricoh Aficio 1022 Operating Instructions Manual

Specifications

This section contains the electrical and hardware specifications for the machine
including information about the options.
Component
Resolution
Printing Speed
Parallel Interface
Printer Language
Fonts
Memory
Hard Disk
Operation Systems sup-
ported by this machine
Network
Network Cable
*1
Only 600 dpi can be specified from the printer driver.
*2
To use NetBEUI, use the SmartNetMoniter for Client port.
Specification
• PCL 5e: 300 dpi, 600 dpi
• PCL 6: 600 dpi
• PostScript 3: 300 dpi, 600 dpi
• RPCS™: 600 dpi
22ppm, 27ppm
(A4K, 8/" × 11"K)
Note
❒ Printing Speed depends on the machine. Check which type of
machine you have.
Standard 36-pin printer cable and a parallel port on the host com-
puter.
IEEE1284
Note
❒ Do not use a parallel cable that is longer than 3 meters (10 feet).
PCL 5e , PCL 6, RPCS™
PostScript 3 (option)
PCL 5e, PCL 6
Afga Font Manager 35 Intellifonts, 10 TrueType fonts, and 1 Bit-
map font Font Manager available.
PostScript 3
136 fonts (Type 2:24, Type 14:112)
Standard : 32MB
Optional SDRAM : 64MB
Note
❒ Using the printer function requires at least 64 MB of memory
(option).
Storage capacity : 6 GB or more
Windows 95/98/Me
Windows 2000
Windows NT 4.0
Mac OS 8.6 to 9.1
Topology : Ethernet 10BASE-T/100BASE-TX
Protocol : TCP/IP, IPX/SPX, NetBEUI
10BASE-T/100BASE-TX shielded twisted-pair (STP, Catego-
ry/Type5) cable.
Specifications
*1
*2
, AppleTalk
6
63