Transfer Report - Ricoh Aficio 1022 Operating Instructions Manual

C C C C
Select [Key Operator Tools].
D D D D
Press [Print List] next to "Box Set-
ting".
Note
❒ If the desired box is not shown,
press [U U U U Prev.] or [T T T T Next].
E E E E
Press the { { { { Start} } } } key.
After printing the list, the display
will return to step
Note
❒ To cancel printing a list, press
[Cancel]. The display will return
E
to step .
❒ If the desired box is not shown,
press [U U U U Prev.] or [T T T T Next].
F F F F
Press the { { { { User Tools/Counter} } } } key.
The initial display is shown.
D
.
Changing Key Operator Settings

Transfer Report

For the Requesting Party to be able to
receive Transfer Result Reports from
the Transfer Station, the Requesting
Party must program the number of
the telephone line their machine is
connected to in their own machine. ⇒
p.47 "Transfer Request", p.84 "ID Re-
ception (Closed Network)"
Be sure to insert a pause after the area
code.
For example, if you are in the United
States and your fax number is 212-
1234567, program the following:
You can program the fax number for
each line (G3, G4).
Limitation
❒ You cannot program or edit Trans-
fer Report when using a line (dur-
ing communication). Program or
edit after communication.
Note
❒ Program the fax number as a
number of Transfer Station. If not,
you cannot use Transfer Request
Transmission.
❒ Up to 16 digit are available for G3.
❒ Up to 29 digit are available for G4.
• 1212-1234567
A A A A
Press the { { { { User Tools/Counter} } } } key.
8
167