2. Checking and Canceling
After you have pressed the { { { { Start} } } } key (after scanning originals), you can check,
edit, or cancel the destination or transmission settings. You can also print a
stored originals or a list of stored files. This feature is available for the following
functions.
• Memory Transmission
• "Confidential Transmission" ⇒ p.7
• "Transfer Request" ⇒ p.47
• "Polling Reception" ⇒ p.12
• "Polling Transmission" ⇒ p.9
Limitation
❒ You cannot check or edit a file being sent or received. Also a Confidential
Transmission file or stored file to be printed as a report cannot be checked or
edited.
Note
❒ There is no file being sent, received or stored by Memory Transmission, if
[Change/Stop TX File] does not appear on the display.
Reference
⇒ Chapter 2, "Memory Transmission" in the Basic Features manual
Checking Destinations
A A A A
Press [Change/Stop TX File].
Transmission Files
B B B B
Select [Check/Change Settings].
Scanning date/time, transmission
mode, destination, total number of
destinations, total number of origi-
nals, file number. and Status are
displayed.
15