Ricoh Aficio 1022 Operating Instructions Manual page 457

Possible Cause
Is the Data In indicator
blinking or lit after starting
the print job?
Note
❒ If you cannot solve the problem by taking the preceding actions, contact your
sales or service representative.
If not blinking or lit, the data is not being sent to the machine.
❖ ❖ ❖ ❖ If the machine is connected to the computer using the
interface cable
Make sure the computer port settings are correct. For a parallel
port connection, port LPT1 or LPT2 should be set.
• Windows 95/98/Me
A
Click [Start], point to [Settings] and then click [Printers].
B
Click to select the icon of the machine. Next, on the [File]
menu, click [Properties].
C
Click the [Details] tab.
D
Check the [Print to the following port] box to make sure that
the correct port is selected.
• Windows 2000
A
Click [Start], point to [Settings] and then click [Printers].
B
Click to select the icon of the machine. Next, on the [File]
menu, click [Properties].
C
Click the [Port] tab.
D
Check the [Print to the following port] box to make sure that
the correct port is selected.
• Windows NT 4.0
A
Click [Start], point to [Settings] and then click [Printers].
B
Click to select the icon of the machine. Next, on the [File]
menu, click [Properties].
C
Click the [Port] tab.
D
Check the [Print to the following port] box to make sure that
the correct port is selected.
❖ ❖ ❖ ❖ Network Connection
Contact your network administrator.
Machine Does Not Print
Solutions
4
45