Call Channel Operation; Transferring The Са!!Спаппе - Icom IC-3SAT Instruction Manual

CALL CHANNEL OPERATION
7-1 Calling up the call channel
A one-touch access call channel is provided for operation
on your most-often-used frequency. The call channel is
separate from the memory channels.
CALL/LOCK
VFO MODE CALL CHANNEL .
1) Push [D] (CALL) to call up the call channel.
2) Push [D] (CALL) again to return to the previous mode.
7-2 Transferring the call
. channel
1) Push [D] (CALL) to call up the call channel.
2) While pushing [Е], push and hold [A] (CLR/M» V) to
transfer the contents into the VFO.
e VFO mode is automatically selected.
ГА
7-3 калаада the call
channel
The call channel contents can be programmed in a similar
way as the memory channels.
Push and hold
Ors
1) Push [A] (CLR) to select VFO mode.
2) Set the desired frequency (and duplex, when required)
to be programmed into the call channel.
3) Push [D] (CALL) to call up the call channel.
4) While pushing [F], push and hold [B] (MR/MW) until
the transceiver emits 3 beeps.
e The displayed frequency is changed to the same as the
VFO frequency.