Icom IC-3SAT Instruction Manual page 40

37
18 OPTIONAL UNIT OPERATION
(1) CODE MEMORY CHANNEL INFORMATION
EM Your 10 code Accept only
Other station's
1D codes Selectable Possible
(Transmit code) | accept or
or inhibit
group code
Memorizing Inhibit Not
ѕрасе* . only Applicable
* Automatically memorizes the ID code of the other station
when receiving a call. This memory is kept until the next
call is received. |
(2) PROGRAMMING A CODE MEMORY
Receive inhibit
O Receive accept
1) While pushing [F], push [5] (CODE) to change the
display for code programming.
2) Rotate the tuning control to select the code memory
channel to be programmed. |
3) Push 3 digit keys to enter the desired code.
e Channel CP does not accept entry.
4) Push [B] (MR) to select "receive accept" or "receive
inhibit."
e When selecting "receive accept,"
front of the digit code.
e Channels CO and CP do not accept selection.
a dash appears in
5) Push [PTT] to return to the previous mode.