Icom IC-3SAT Instruction Manual page 26

—
SCAN OPERATION
8-1 Scan types
e FULL SCAN
220 MHz 225 MHz
| е FREQUENCY SKIP
FUNCTION
Repeatedly scans all frequen-
cies in the entire 220 MHz
band. . The frequency skip
function can be used.
Repeatedly scans all memory
channels in sequence. The
memory skip function can be
used during memory scan.
Skips unwanted signals that
inconveniently stop scanning.
See p. 25 for programming.
MON
O
«©
Кес
The IC-3SAT has 3 scan types апа 2 skip functions as
described below. Perfect for hands-free operation.
ePROGRAMMED SCAN
Scan edges
eSCAN RESUME
CONDITION
Receive
a signal
Pause scan ——>
Resume
Timer scan—— - - - mm ‫ج‬‎
e MEMORY SKIP
FUNCTION
G— . —
Repeatedly scans between two
user-programmed frequencies.
See p. 24 for scan edge pro-
gramming. The frequency skip
function can be used.
2 resume conditions are availa-
ble: pause and timer scan.
When receiving a signal, pause
scan pauses until the signal
` disappears; timer scan pauses
for approx. 10 sec.
Skip unnecessary memory chan-
nels, making shorter intervals
for memory scanning. See
p. 26 for programming.