Icom IC-3SAT Instruction Manual page 33

CLOCK AND TIMER OPERATION
1-1 Clock mode
[he transceiver is equipped with a clock function for
operating the power on timer and auto power off timer.
1) While pushing [F], push [9] (CLOCK) to enter CLOCK
mode. ix
2) Push [PTT] to return to the previous mode.
Auto power off
Power on timer
l
11-2 Setting time
+ б>
CLR/M-V `
1) While pushing [F], push [9] (CLOCK) to enter CLOCK
mode.
2) Push [+] (v) or [#] (A) to select the clock time display
as shown above. |
3) While pushing [F], push [8] (SET). The displayed time
blinks.
4) Rotate the tuning control to set the hours.
5) Push [*] (v) or [#] (A), then rotate the tuning control
` to set the minutes.
6) Push [A] (CLR) to set the time.
7) Push [PTT] to exit CLOCK mode.
TIME ERROR: +1 min./week